DIY Folded Maple Leaf Thanksgiving Place Card SVG
Share

I woke up with a crazed determination to make a folded paper maple leaf. No particular reason other than my brain attached to the idea and wouldn't let it go.
I didn't want it to look like a boring old leaf either, it needed crisp folds, pointy leafy edges, and a stem. Something pretty enough for a Thanksgiving place setting, but made from cardstock because finding and using a regular leaf from nature is way too mundane.
Plus, how hard could it be?
Apparently, about eight variations and ten pieces of cardstock hard....but I digress. Eventually I got it, and it's lovely, and totally useable for all sorts of Thanksgiving events.
You can make your own folded maple leaves!
The digital cutting file includes the leaf design with its attached stem, a name tag, a small back brace, and assembly instructions. You’ll need cardstock, a compatible cutting machine, double-sided craft tape, glue, and twine or ribbon. I'll walk you through the steps in this blog post (even though they're also included in the files you purchase).
Get the 3D Maple Leaf Place Card Cutting File Here.
1. Cut out the pieces
Cut the leaf, tag, and back brace from your cardstock. Check your cut and fold settings before sending the file to your machine (speaking from experience here).

2. Fold the accordion
Fold back and forth along the accordion lines, alternating directions. Crease each fold firmly, then bend the folded strip in half at the center line. Fold the lines on the stem as well.

3. Secure the bottom FIRST
Before joining the top or closing the stem, use small pieces of double-sided tape to secure the accordion layers together at the gathered base. (You'll need to adhere the front and back of the accordion.) Press firmly.
Keep the tape close to the center line so the edges can spread open. This step prevents your leaf from giving up on being a leaf.
4. Assemble the stem
Fold the stem lengthwise along its fold lines to form a triangular prism. Glue the narrow tab inside the opposite edge and hold until secure.

5. Join the top
Apply adhesive to the joining tab and attach it to the opposite half, aligning the center seam. Gently fan out the pleats into a maple leaf shape.
6. Attach the back brace
Glue the brace onto the back so it bridges the connection between the leaf and stem. Let the adhesive set before handling. We all need a little support sometimes - this will ensure your leaf remains intact.
7. Add the name tag
Write your guest’s name on the tag, thread twine or ribbon through the hole, and tie it around the stem. Check the spelling before tying, Thanksgiving already offers plenty of opportunities for family tension.
8. Set the table
Place a leaf on each plate or napkin. Admire your work. Accept compliments without mentioning how much adhesive you got on your tabletop and fingers and shirt (is that just me? Why is it everywhere?)
ENJOY!



